GlowMo Fitment Kit — 6-Piece Underglow, Pick Your Sizes

The single GlowMo Fitment Kit listing — pick any 3 strip sizes from the dropdowns and we ship pre-cut, pre-sealed, pre-tested. No measuring on arrival. No DM-ing support to figure out sizes. No surprise gaps. The full plug-and-play install package in one box, $199.99 flat across every combination.

The mission

Help people GLOW MO. Place LEDs in as many places as possible. That's why we sell 60 size variants instead of 4 cookie-cutter kits. Pick what fits YOUR car, not a category some marketer made up.

How to pick your sizes

Use the dropdowns above. If you're not sure, here's the cheat sheet:

• Compact (under 175"): 80cm front · 150-160cm side · 40cm rear (Mini, Golf, Yaris, Fiat 500)
• Coupe/Sedan (175-185"): 90cm front · 170-180cm side · 50cm rear (Civic, Camry, BMW 3/4-Series, Tesla Model 3, Mustang)
• Large Sedan/Crossover (185-200"): 100cm front · 180-190cm side · 50-60cm rear (Model S, Pilot, Outback, X3, Highlander)
• Truck/SUV (200"+): 110cm front · 190cm side · 60cm rear (F-150, Silverado, Ram, Tundra, Tahoe, Wrangler)

The full Sizing Guide covers the pro install technique — including the 90° wire-bend trick that turns a "good install" into a pro one.

Pro install tip — the 90° wire-bend

Don't pick a strip that exactly matches your rocker length — pick one ~2" SHORTER than the visible rocker. Use the extra ~1" on each end to bend the strip's wire 90° toward the chassis, mounting the connector cleanly inside the wheel-arch opening. Maximum lit length, hidden wire transitions, looks intentional. Example: BMW 428i F32 has a 78" rocker — pick the 190cm (74.8") side variant, 3.2" of slack splits 1.6" each side for the bend.

What's in the box (every Fitment Kit, every variant)

• 2× Front LED strips (your size pick) — IP68 RGBIC, black PCB, professionally sealed in clear silicone with 3M VHB tape pre-applied
• 2× Side LED strips (your size pick) — same spec
• 2× Rear LED strips (your size pick) — same spec
• 1× SP601E Bluetooth controller — Magic LED, 200 chasing modes + unlimited solid colors, app + RF remote + sound-active mode (multi-channel-upgradeable to SP602E or SP608E — see add-ons)
• 1× Power wiring harness with relay + fuse + cabin-mounted on/off switch — solves the "battery drain when off" problem that kills other kits
• 1× 3-pin barrel Y-connector — splits controller signal across all 6 strips
• 5× 6.5ft 3-pin extension cables — route signal from controller to each strip
• 12× 304 stainless steel rubber-cushioned saddle clamps — premium auto-grade mounting (not plastic clips)
• 50-pack 6" black zip ties — clean wire routing under chassis
• GlowMo brand sticker pack
• Install QR card with step-by-step + Discord community access

Why GlowMo over LowGlow Standard ($175)

• IP68 (full submersion) — LowGlow Standard is IP67 only. We've all been through a car wash that exposed an IP67 weakness.
• Black PCB premium chips — LowGlow Standard's own page admits "Different PCB Boards (Not as Durable)" + "Not as Bright" + "slight color difference" vs their OG. Ours matches the OG quality at $100 less than OG.
• 304 stainless saddle clamps + rubber cushioning — automotive-grade mount hardware. LowGlow ships generic plastic mounting tabs.
• Multi-channel upgrade path — SP602E (+$29.99) or SP608E (+$59.99) for independent zone control. LowGlow Standard is fixed-config, no upgrade option.
• Cross-kit compatibility — works with all GlowMo accessories. LowGlow Standard's own page: "WILL NOT WORK WITH ANY OTHER KIT WE HAVE."

Spec sheet

• Voltage: 12V DC universal
• LEDs: RGBIC addressable (true color flow + chasing patterns + music-reactive)
• Sealing: IP68 silicone-sealed (rain, snow, car wash, off-road tolerant)
• PCB: Black PCB (invisible during the day, premium finish)
• Connectors: 3-pin waterproof barrel
• Adhesion: 3M VHB 10mm tape + stainless steel saddle clamp backup
• Control: Bluetooth app + RF remote + sound-active mode
• Warranty: 1 Year defective-product replacement
• Install time: ~30-45 minutes, no drilling required

Want more zones? Multi-channel upgrade path:

• SP602E 2-zone controller upgrade — $29.99 (front + rear independent)
• SP608E 8-zone controller upgrade — $59.99 (every zone independent — show car configuration)
• Extra strip pair — $34.99 (hood, grille, footwell, custom zones)
• 5m bare WS2811 roll — $39.99 (DIY-cut for fully-custom zones)

All multi-channel upgrades include a 12V power distribution block + pre-bundled tap-off harness — solves the "loose V+/GND wires" problem that plagues other multi-channel kits.